𝒍𝒆𝒎𝒂𝒏𝒏

ASMedia is the only controller IC manufacturer that can be trusted for these IME. They also have the best Linux support compared to the other options and support pass-through commands. These are commonly found in USB DAS enclosures, and a very small fraction of single disk SATA enclosures

Innostor controllers max out at SATA 2 and lock up when you issue pass-through commands (e.g. to read SMART data). These also return an incorrect serial number. These are commonly found in ultra cheap desktop hard drive docks, and 40pin IDE/44pin IDE/SATA to USB converters

JMicron controllers (not affiliated with the reputable Micron) should be avoided unless you know what you are doing… UASP is flaky, and there are hacky kernel boot time parameters required to get these working on Raspberry Pi boards. Unfortunately these are the most popular ones on the market due to very low cost

Probably not.

However, not all USB to SATA adapters support SMART, so even if there is a bad sector that gets remapped by the HDD on-the-fly (and thus does not show up in the software scan), you may not find out easily

Chromium… I’m so getting downvoted with this one.

Why? Anyone is free to use whatever browser floats their boat 🤷‍♂️

Firefox itself is quite sluggish and slow to open on that piece of hardware

Do you get the same issues on an older version of Firefox for that device? If yes, proceed with caution - your device’s internal EMMC might be nearing EOL considering how old Android 6 is

But the problem is they all do not support modern arm64 apps that most Android phones use nowadays. Instead they need this other type called armeabi-v7a

They probably just stopped building for Android 6 devices. The SDK and various third party libraries continue to add new features all the time, and unlike Firefox, the majority of devs do not have the time or resources to manually code-in the missing bits to retain compatibility with old versions of Android. As a side effect, these custom implementations may have bugs or issues that go unnoticed due to the shrinking install base.

One of the more noticeable bits that changed is the Share API, which is why Firefox’s one looks so different vs every other app. There are other things like enhanced battery optimization and the storage API, which have changed a lot since Android 6.

IMO your best option is an older version of FF, or install Lineage (etc) on that device and use another browser

Edit: change “age of device” to “shrinking install base”

IIRC Beehaw doesn’t federate downvotes. The OP has been pretty heavily downvoted for no valid reason

I’ve tried both on my low powered HTPC and came to the same conclusion - especially noticeable where video acceleration is concerned

Something about that channel feels “off”, don’t know what it is. Maybe all the rants and abundance of negative opinions?? Perhaps it’s the culture difference in how he communicates on camera?

The only positive videos I’ve seen are him moving to macOS, the dell laptop one, and i guess the keyboard one, the other ones seem to be mostly opinion pieces & rants. There are other channels that do a better, more balanced job of this I think

Explains why I was having issues with this in Gnome on my HTPC…

Ended up making a remote button shortcut to maximise and restore apps

I used to have only 4GB in my old Linux HTPC, didn’t take much for it to choke when using the browser. Upgraded to 16GB and no issues since

Some websites I know actually do this - usually end up getting around it by using selectors to identify elements nested in a particular order, rather than using class names. Nowhere near as reliable though

Absolutely love the ability to share links from my android and have them open automagically on my linux HTPC. Also made a command shortcut for my laptop so I can unlock it from my android. Really versatile

Precisely this

Mine can also dehydrate food super quickly with a variable fan speed, which my traditional oven can’t do without burning through a ton of unnecessary energy

I wholeheartedly agree with this tbh. Love FreeCAD for my 3D printing stuff, pretty much use it daily, however compared to something like Solidworks or AutoCAD it would be torture IMO to willingly chose FreeCAD for a complex real world product.

The biggest roadblock for FreeCAD right now is that is isn’t that forgiving, you often have to go into a “technical” way of thinking to work around its quirks. The reality is, designers want to design, not become technical experts at navigating FreeCAD.

Even something like creating a thread shouldn’t be as involved as FreeCAD makes it - once you get used to it it’s OK, but in other CAD solutions it’s often as simple as clicking a hole and choosing a thread creation tool…

I’m probably an outlier lol, I installed the Windows version of 7zip (via wine) alongside the native Linux version just to have a GUI for setting the compression parameters if I’m creating a new archive from the file manager

Steam deck is the only linux device that does AFAIK, via their in-house compositor Gamescope.

It’s on GitHub, but I have a feeling some of the HDR specfics that would be needed for an open source linux implementation could be at the ransom of some standards body, like 4K 120fps support on AMD graphics cards under Linux

That thread could do with one of these: https://en.m.wikipedia.org/wiki/Fire_retardant

Hehehe

FFmpeg (libavcodec) is just one of 22 codecs that VLC is shipped with

https://wiki.videolan.org/Contrib_Status#Codecs

Micromobility is pretty active if you’re interested in product coverage and news. As for more organic content, it’s pretty infrequent in any of the existing bicycle communities ☹️

I use it on the deck - it works really well, however you can definitely see the artifacting when fast motion is occuring. There are also some odd bugs when using SMAA with FSR turned on, where the frame gen model gets confused and starts moving the game UI/HUD with the camera.

Apparently it works much better at framerates above 60FPS since the model has more data to predict future frames…

If you have genuine DLSS available it’s probably better to stick to that IMO

I used to use MQTT, static_status and Healthchecks.io, and have that data passed through to Home Assistant, but it started to get pretty cumbersome as the amount of machines I had grew.

I now use just Zabbix and HealthchecksIO. I did need to spend some time writing new templates for some additional data I wanted to collect (like SMART data for SSDs that provide health metrics in non-standard attributes, and HealthchecksIO so I could see the status of various checks on my zabbix dashboard)

Zabbix also has some additional features I found appealing, like proxies that can continue recording data when the main server is down, and built in encryption. Some checks like open ports/icmp responses etc can be checked using either the local agent, the remote server, or both, which helps quickly diagnose things like firewall config issues.

I did look at some other solutions, but I wanted something integrated to hit the ground running. Mobile apps are very limited, and there is no official one to my knowledge. I use Moobix which I don’t believe is FOSS - but I could be wrong there

Try each solution out and see what works best for you!

Welcome!

Since you’re on the lemmy.world instance, there’s a bunch of additional interfaces available to you:

• https://old.lemmy.world/ (Something familiar)
• https://a.lemmy.world/
• https://photon.lemmy.world/

If you’re on mobile, there’s a ton of apps to choose from at https://join-lemmy.org/apps , or if PWAs are more your thing, your instance has the Voyager/Mlmym interface setup at https://m.lemmy.world/

Finding communities used to be difficult, but it should be straightforward now just from the search, seeing as it is the largest instance.

Hope you enjoy your stay 😁